How is a standup tent set up?

Set up your standup tent in 1 minute

A standup tent has 4 major advantages that make it the customers’ preferred standup tent on the market:

1) When it is folded, it takes up no space and can be easily transported around.

2) It can be set up in 1 minute and requires no assembly instructions, and you do not need to be 2 people to do it (but it is easier).

3) A sturdy frame and a water-repellent canopy make the tent usable both indoors and outdoors, even in bad weather.

4) Easy profiling of your business. Get printing done on your frieze, canopy, or side.

1 person can set up a standup tent

Start by unpacking your standup tent and placing it on its feet as shown in the pictures below. If the roof cover is not already installed, do this now (only the first time); you can spread it out a bit to make it easier to distribute the roof cover over the frame.

Remember to secure the Velcro around the legs and the cord is placed around the center pole of the frame, so the canopy is straight when the tent is erected.

If there are 2 people, they stand at each end of the tent and grab the bottom, middle poles and walk backwards. If there is only 1 person, they first pull out on one side and at the corner, and then do the same at the opposite end.

When the frame is fully unfolded on the sides and it has locked onto the legs, it is time to raise it up. Here, hold onto the pins on each leg, gripping the lower part of the leg while lifting the frame up until one side is raised.

Raise the other side now, and the tent stands as you wish it. After that, the height can easily be adjusted by adjusting the leg height. Make sure to check the velcro closures so that the roof cover is completely secure.

At Zederkof, you will also find a large accessories program for Stand Up tents including sides, weight stabilizers, weights, pegs, gutters, and guy ropes.

If you have any other questions, you are always welcome to contact us at info@zedekrof.dk or tel. 89 12 12 00.